Update: Reynolds Fire in Merced County hits 100% containment by Tuesday afternoon

The creation of this content included the use of AI based on templates created, reviewed and edited by journalists in the newsroom. Read more on our AI policy here.

Updated: 4:07 p.m. April 21

First discovered: 25 hours ago, 3:02 p.m. April 20

Initial location: South Reynolds Ave and Christian Ave, Dos Palos, Merced County, Calif.

Fire unit: Merced County Fire Department

Fire type: Wildfire

Fire name: Reynolds Fire

Reynolds Fire initially started 3:02 p.m. April 20 at South Reynolds Ave and Christian Ave, Dos Palos in Merced County, California.

It has burned 40 acres after being active for 25 hours. By Tuesday afternoon, the fire crew has achieved full containment of the blaze. The cause of it remains under investigation.

See live video from the area:

Https://ops.alertcalifornia.org/cam-console/Axis-PanocheMtn1

Fire containment

What does 100% containment mean?

Note that full containment doesn't mean the fire is completely out. In this case, it means that firefighters have managed to get a line completely around the wildfire's perimeter and it is now stopped from spreading. A fully contained wildfire may continue to burn within the containment perimeter but is not likely to spread.

However, there's a significant difference between containing and controlling a wildfire. After the fire is fully contained, the next step is to control it. Controlling a fire means ensuring that the fire can't spread or cross the containment line.

Containment is part of a larger plan for managing a wildfire. It is normally expressed as a percentage and it refers to how much of the fire perimeter has been surrounded/enclosed by a control line that firefighters create. The containment percentage indicates a certain level of control, but it doesn't always correlate to safety level. Also, it's important to note that containment doesn't mean a fire is out.

How is containment measured?

The incident's central command constantly receives progress reports from firefighters on the ground. As the fireline is constructed, inspected or reinforced, mappers record those details to adjust the containment percentage. The percentage tells the public how much of the fire perimeter is believed to not go beyond the control lines.

Source: Cal Fire

United Robots Sacramento

This story was originally published April 21, 2026 at 3:06 PM.