Update: General Fire in Kern County hits 100% containment by Friday morning

The creation of this content included the use of AI based on templates created, reviewed and edited by journalists in the newsroom. Read more on our AI policy here.

Updated: 8:13 a.m. May 8

First discovered: 40 hours ago, 3:59 p.m. May 6

Initial location: Hwy 58 East, near General Beale Road, Arvin, Kern County, Calif.

Fire unit: Kern County Fire Department

Fire type: Wildfire

Fire name: General Fire

General Fire initially started 3:59 p.m. May 6 on Hwy 58 East, near General Beale Road, Arvin in Kern County, California.

It has burned 25 acres after being active for 40 hours. By Friday morning, the blaze has been fully contained. However, the cause is still under investigation.

Fire containment

What does 100% containment mean?

Note that full containment doesn't mean the fire is completely out. In this case, it means that the whole perimeter of the wildfire has been surrounded by a control line and it is now stopped from spreading. A fully contained wildfire may continue to burn within the containment perimeter but is not likely to spread.

However, there's a significant difference between containing and controlling a wildfire. After the fire is fully contained, the next step is to control it. Controlling a fire means ensuring that the fire can't spread or cross the containment line.

Containment is part of a larger plan for managing a wildfire. It is normally expressed as a percentage and it refers to how much of the fire perimeter has been surrounded/enclosed by a control line that firefighters create. The containment percentage indicates a certain level of control, but it doesn't always correlate to safety level. Also, it's important to note that containment doesn't mean a fire is out.

How is containment measured?

The incident's central command constantly receives progress reports from firefighters on the ground. As the fireline is constructed, inspected or reinforced, mappers record those details to adjust the containment percentage. The percentage tells the public how much of the fire perimeter is believed to not go beyond the control lines.

Source: Cal Fire

United Robots Sacramento

This story was originally published May 8, 2026 at 8:17 AM.