Update: Bain Fire still uncontained and keeps expanding in Riverside County

The creation of this content included the use of AI based on templates created, reviewed and edited by journalists in the newsroom. Read more on our AI policy here.

Updated: 6:54 p.m. May 19

First discovered: 7 hours ago, 11:24 a.m. May 19

Initial location: Limonite Ave and Bain Street, Jurupa Valley, Riverside County, Calif.

Fire unit: Cal Fire Riverside Unit

Fire type: Wildfire

Fire name: Bain Fire

Bain Fire initially started today at 11:24 a.m. at Limonite Ave and Bain Street, Jurupa Valley in Riverside County, California.

After being active for seven hours, it has burned 907.4 acres. A fire crew of 100 has been working on site, however, the blaze remains uncontained and is still growing by Tuesday evening. However, the cause is still under investigation.

22 engines, two water tenders, two helicopters, two dozers and four hand crews are working to suppress the fire. According to Cal Fire, "Numerous firefighting air tankers from throughout the State are flying fire suppression missions as conditions allow."

Evacuation information from Cal Fire

Evacuation Orders

Immediate threat to life. This is a lawful order to LEAVE NOW. The area is lawfully closed to public access.

Evacuation Orders have been issued for the following zones:

JUR-0180

RIV-0306

RIV-0307

RIV-0309

RIV-0310

RIV-0182

JUR-0181

JUR-0185

RIV-0186

Evacuation Warnings

Potential threat to life and/or property. Those who require additional time to evacuate, and those with pets and livestock should leave now.

Evacuation Warnings have been issued for the following zones:

RIV-0308

RIV-0447

RIV-0445

RIV-0443B

RIV-0312

RIV-0313

RIV-0319

NOR-0442B

NOR-0304A

NOR-0305B

JUR-0176A

JUR-0183

JUR-0095

JUR-0097

Evacuation Shelters

La Sierra Senior Center

5215 La Sierra Avenue, Building A

Riverside, CA 92505

See live video from the area:

Https://cameras.alertcalifornia.org/?id=Axis-BoxSpringsEast2

Fire containment

Containment is part of a larger plan for managing a wildfire. It is normally expressed as a percentage and it refers to how much of the fire perimeter has been surrounded/enclosed by a control line that firefighters create. The containment percentage indicates a certain level of control, but it doesn't always correlate to safety level. Also, it's important to note that containment doesn't mean a fire is out.

How is containment measured?

The incident's central command constantly receives progress reports from firefighters on the ground. As the fireline is constructed, inspected or reinforced, mappers record those details to adjust the containment percentage. The percentage tells the public how much of the fire perimeter is believed to not go beyond the control lines.

Source: Cal Fire

United Robots Sacramento

This story was originally published May 19, 2026 at 12:10 PM.