Update: Lonestar 2 Fire in San Diego County remains 100% contained as of Sunday morning

The creation of this content included the use of AI based on templates created, reviewed and edited by journalists in the newsroom. Read more on our AI policy here.

Updated: 6:01 a.m. June 28

First discovered: 11 hours ago, 6:25 p.m. June 27

Initial location: 8671 Lonestar RD, Otay Mesa, San Diego County, Calif.

Fire unit: Cal Fire San Diego Unit

Fire type: Wildfire

Fire name: Lonestar 2 Fire

Lonestar 2 Fire initially started 6:25 p.m. June 27 on 8671 Lonestar RD, Otay Mesa in San Diego County, California.

Since its discovery 11 hours ago, it has burned 15 acres. As of Sunday morning, a fire crew of 26 has achieved full containment of the blaze. However, investigations into the cause are ongoing.

The fire has been fought by six engines, two water tenders, one dozer and one hand crew. According to Cal Fire, "Numerous firefighting air tankers from throughout the State are flying fire suppression missions as conditions allow."

Fire containment

What does 100% containment mean?

Note that full containment doesn't mean the fire is completely out. In this case, it means that the wildfire has been fully enclosed by a control line and it is now stopped from spreading. A fully contained wildfire may continue to burn within the containment perimeter but is not likely to spread.

However, there's a significant difference between containing and controlling a wildfire. After the fire is fully contained, the next step is to control it. Controlling a fire means ensuring that the fire can't spread or cross the containment line.

Containment is part of a larger plan for managing a wildfire. It is normally expressed as a percentage and it refers to how much of the fire perimeter has been surrounded/enclosed by a control line that firefighters create. The containment percentage indicates a certain level of control, but it doesn't always correlate to safety level. Also, it's important to note that containment doesn't mean a fire is out.

How is containment measured?

The incident's central command constantly receives progress reports from firefighters on the ground. As the fireline is constructed, inspected or reinforced, mappers record those details to adjust the containment percentage. The percentage tells the public how much of the fire perimeter is believed to not go beyond the control lines.

Source: Cal Fire

United Robots Sacramento

This story was originally published June 28, 2026 at 6:26 AM.